Add the below entries for Inbound and Outbound entries:
Start RRAS -> IP Routing -> General -> Choose nic with external IP (Suppose
= NIC1)
Inbound
Code:
Sourse any, Destination Address NIC1-Public-IP, tcp, source 80, destination
any
Sourse any, Destination Address NIC1-Public-IP, tcp, source 443, destination
any
Sourse any, Destination Address NIC1-Public-IP, tcp, source 53, destination
any
Sourse any, Destination Address NIC1-Public-IP, udp, source 53, destination
any
Outbound
Code:
Source Address NIC1-Public-IP, Destination any, tcp, source any, destination
80
Source Address NIC1-Public-IP, Destination any, tcp, source any, destination
443
Source Address NIC1-Public-IP, Destination any, tcp, source any, destination
53
Source Address NIC1-Public-IP, Destination any, udp, source any, destination
53
Wednesday, September 30, 2009
Wednesday, August 5, 2009
How to send email using telnet
At a command prompt, type telnet, and then press ENTER. This command opens the Telnet session.
Type set localecho and then press ENTER. This optional command lets you view the characters as you type them. This setting may be required for some SMTP servers.
Type set logfile. This optional command enables logging of the Telnet session to the specified log file. If you only specify a file name, the location of the log file is the current working directory. If you specify a path and a file name, the path must be local to the computer. Both the path and the file name that you specify must be entered in the Microsoft DOS 8.3 format. The path that you specify must already exist. If you specify a log file that doesn't exist, it will be created for you.
Type open mail.clientdomain.com 25 and then press ENTER.
Type EHLO computersupportforce.com and then press ENTER.
Type MAIL FROM:james@computersupportforce.com and then press ENTER.
Type RCPT TO:user@domain.com
Type DATA and then press ENTER. You will receive a response that resembles the following:
354 Start mail input; end with.
Type Subject: Test from Contoso and then press ENTER.
Press ENTER. RFC 2822 requires a blank line between the Subject: header field and the message body.
Type This is a test message and then press ENTER.
Press ENTER, type a period ( . ) and then press ENTER. You will receive a response that resembles the following:
250 2.6.0 Queued mail for delivery
To disconnect from the destination SMTP server, type QUIT and then press ENTER. You will receive a response that resembles the following:
221 2.0.0 Service closing transmission channel
To close the Telnet session, type quit and then press ENTER.
Type set localecho and then press ENTER. This optional command lets you view the characters as you type them. This setting may be required for some SMTP servers.
Type set logfile
Type open mail.clientdomain.com 25 and then press ENTER.
Type EHLO computersupportforce.com and then press ENTER.
Type MAIL FROM:james@computersupportforce.com and then press ENTER.
Type RCPT TO:user@domain.com
Type DATA and then press ENTER. You will receive a response that resembles the following:
354 Start mail input; end with
Type Subject: Test from Contoso and then press ENTER.
Press ENTER. RFC 2822 requires a blank line between the Subject: header field and the message body.
Type This is a test message and then press ENTER.
Press ENTER, type a period ( . ) and then press ENTER. You will receive a response that resembles the following:
250 2.6.0
To disconnect from the destination SMTP server, type QUIT and then press ENTER. You will receive a response that resembles the following:
221 2.0.0 Service closing transmission channel
To close the Telnet session, type quit and then press ENTER.
Thursday, June 11, 2009
How to add more connections to Sybase for MicroMD
How to add more connections to Sybase for MicroMD
a) LicencesView
i) cmd
ii) cd .. (twice) -> cd p (tab to Program Files) -> cd s (tab to Sybase) -> cd s (tab to SQL Anywhere) -> cd w (tab to win 32)
iii) dblic dbsrv9.exe
(1) If newer version of Sybase is installed, command is dblic dbsrv9.lic
b) Adding Additional Licences
i) Stop Medical service
(1) Sybase Central --OR--
(2) Open Sybase icon in toolbar and click exit --OR--
(3) cmd -> net stop asanys_medical (Note: net start will start database)
ii) cmd
iii) cd .. (twice) -> cd p (tab to Program Files) -> cd s (tab to Sybase) -> cd s (tab to SQL Anywhere) -> cd w (tab to win 32)
iv) dblic -l perseat -u # dbsrv9.exe “user” “company”
(1) #: grand total of licenses; ex: if already have 5 & are adding 5, #=10.
(2) If newer version of Sybase is installed, command changes from dbsrv9.exe to dbsrv9.lic
v) Restart Medical service
a) LicencesView
i) cmd
ii) cd .. (twice) -> cd p (tab to Program Files) -> cd s (tab to Sybase) -> cd s (tab to SQL Anywhere) -> cd w (tab to win 32)
iii) dblic dbsrv9.exe
(1) If newer version of Sybase is installed, command is dblic dbsrv9.lic
b) Adding Additional Licences
i) Stop Medical service
(1) Sybase Central --OR--
(2) Open Sybase icon in toolbar and click exit --OR--
(3) cmd -> net stop asanys_medical (Note: net start will start database)
ii) cmd
iii) cd .. (twice) -> cd p (tab to Program Files) -> cd s (tab to Sybase) -> cd s (tab to SQL Anywhere) -> cd w (tab to win 32)
iv) dblic -l perseat -u # dbsrv9.exe “user” “company”
(1) #: grand total of licenses; ex: if already have 5 & are adding 5, #=10.
(2) If newer version of Sybase is installed, command changes from dbsrv9.exe to dbsrv9.lic
v) Restart Medical service
Tuesday, April 14, 2009
For Bev
"C:\Program Files\Java\jre1.6.0_07\bin\javaws.exe" http://sabrevpn.sabre.com/vpnclient/sslvpn-tn.jnlp
Friday, April 3, 2009
How to enable account track in Bizhub Copiers if Grayed out
In the printer driver control panel:
Click on configure tab
Click on Acquire Settings button
Remove the Tick from Auto
Click OK
On the Device Option list, scroll and highlight "Account Tracking".
Using drop list, change to Enable.
Apply.
OK.
Click on configure tab
Click on Acquire Settings button
Remove the Tick from Auto
Click OK
On the Device Option list, scroll and highlight "Account Tracking".
Using drop list, change to Enable.
Apply.
OK.
Wednesday, March 4, 2009
How to fix corrupt dvd drivers in Vista
James Sheehan : DVD drive not working needs drivers
[An agent will be with you shortly.]
[You are now chatting with Katelynn .]
Katelynn : Hello James.
Katelynn : Welcome to HP Total Care for Notebooks.
Katelynn : I understand that your CD/DVD is not working.Am I Right?
James Sheehan : yes
James Sheehan : I have vista 64bit and my dvd drive has a yellow mark in device manager
James Sheehan : device status says windows cannot load device driver
Katelynn : I see...
Katelynn : Thank you for the information.
Katelynn : Its unfortunate..
Katelynn : Since how long you are experiencing the issue?
James Sheehan : the laptop is pretty new and I dont think it ever worked
James Sheehan : laptop is like a month old
James Sheehan : today is the first time I really needed the drive so today is the first time I think I have tried to use it
Katelynn : I understand how frustrating the situation is.....
Katelynn : I realize the gravity of the situation and I certainly would like to assure you of our best services as your satisfaction is our primary goal.
Katelynn : May I ask you few questions regarding the issue?
James Sheehan : sure
Katelynn : May I know have you made any Software or hardware changes recently on your Notebook?
James Sheehan : no hardware
James Sheehan : I have installed Picassa
James Sheehan : quicktime
James Sheehan : Yahoo instant messenger
James Sheehan : maybe some others like that
Katelynn : Is there a CD/DVD icon listed under my computer?
James Sheehan : no
Katelynn : Alright.
Katelynn : In order to isolate the issue we need to perform few trouble shooting steps , is that okay with you ?
James Sheehan : y
Katelynn : James, let me expalin.
James Sheehan : I am ready
Katelynn : In this case there won't be any CD/DVD drivers available for any notebook.
Katelynn : Normally some times due to the changes made in the Notebook causes the drivers of the CD/DVD drive to get corrupted an that causes these sporadic behaviour of the drive, removing the filters resolves the issue.
James Sheehan : ok
James Sheehan : I follow
James Sheehan : how do I remove the filters.
Katelynn : Sure, I will help you with the steps in this regard.
Katelynn : Please perform the below given steps.
Katelynn : Open device manager.
Katelynn : 1. Tap Window key(flag key on the keyboard) and R key on the keyboard, at once. You would see the Run window on the screen.
Katelynn : 2. Type devmgmt.msc and Click Ok.
James Sheehan : open
Katelynn : Click on the '+' sign near the CD/DVD drive and let me know the devices under it.
James Sheehan : hl-dt-st dvdram gsa-t50l ata device
Katelynn : Just to confirm is there now a yellow exclamation mark on the device.
James Sheehan : yes
Katelynn : Thank you for the confirmation.
Katelynn : Now, right click on CD/DVD drive you have and click on uninstall driver.
James Sheehan : k
James Sheehan : uninstalled
Katelynn : Alright.
Katelynn : 1. Now click Start , and enter "regedit " into the Start Search field. The registry editor window appears.
Katelynn : 2. Select Computer in the main window.
James Sheehan : k
Katelynn : 3.Click File , Export , type a filename that is easy for you to remember, and click Save . A copy of the registry has saved for back-up purposes to the Documents folder. If problems occur after using these steps, browse to the file and double-click it to restore the registry.
James Sheehan : it is backing up now
James Sheehan : done
Katelynn : Alright.
Katelynn : We are done upto some extent.
Katelynn : 4. Click the plus sign ( + ) next to the following items in the list:
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
Katelynn :
5.Select CLASS option
Katelynn : 6.Select 4D36E965-E325-11CE-BFC1-08002BE10318 . Make sure you have selected this exact key name.
James Sheehan : k
Katelynn : 7.Select the LowerFilters value and press the Delete key. Confirm the deletion by clicking Yes
Katelynn : 8.If an UpperFilters value is also listed, select UpperFilters in the right window and press the Delete key. Confirm the deletion by clicking Yes .
James Sheehan : k deleted
Katelynn : Delete either of the options you see.
James Sheehan : There was only lower and I deleted it..
Katelynn : That's good.
Katelynn : I appreciate your efforts.
Katelynn : Open device manager again , Once just click on the computer option in the device manager first and then click on the Action menu on the top of the Device Manager window and select the option "Scan for hardware changes".
James Sheehan : ok drive is back in "computer"
James Sheehan : also no yellow mark in device manager
Katelynn : That's Great!
Katelynn : Perfect!!!
James Sheehan : it is reading my cd as well..
Katelynn : Thank you for the appreciation. Without your co-operation, I would have been ineffective.
James Sheehan : what causes this
Katelynn : Now, please try playing a dvd or cd in order to check whether the disc drive works and let me know if it works ?
James Sheehan : you said the install of another program? hmm
Katelynn : That's nice.
James Sheehan : I am installing quicken as we speak
[An agent will be with you shortly.]
[You are now chatting with Katelynn .]
Katelynn : Hello James.
Katelynn : Welcome to HP Total Care for Notebooks.
Katelynn : I understand that your CD/DVD is not working.Am I Right?
James Sheehan : yes
James Sheehan : I have vista 64bit and my dvd drive has a yellow mark in device manager
James Sheehan : device status says windows cannot load device driver
Katelynn : I see...
Katelynn : Thank you for the information.
Katelynn : Its unfortunate..
Katelynn : Since how long you are experiencing the issue?
James Sheehan : the laptop is pretty new and I dont think it ever worked
James Sheehan : laptop is like a month old
James Sheehan : today is the first time I really needed the drive so today is the first time I think I have tried to use it
Katelynn : I understand how frustrating the situation is.....
Katelynn : I realize the gravity of the situation and I certainly would like to assure you of our best services as your satisfaction is our primary goal.
Katelynn : May I ask you few questions regarding the issue?
James Sheehan : sure
Katelynn : May I know have you made any Software or hardware changes recently on your Notebook?
James Sheehan : no hardware
James Sheehan : I have installed Picassa
James Sheehan : quicktime
James Sheehan : Yahoo instant messenger
James Sheehan : maybe some others like that
Katelynn : Is there a CD/DVD icon listed under my computer?
James Sheehan : no
Katelynn : Alright.
Katelynn : In order to isolate the issue we need to perform few trouble shooting steps , is that okay with you ?
James Sheehan : y
Katelynn : James, let me expalin.
James Sheehan : I am ready
Katelynn : In this case there won't be any CD/DVD drivers available for any notebook.
Katelynn : Normally some times due to the changes made in the Notebook causes the drivers of the CD/DVD drive to get corrupted an that causes these sporadic behaviour of the drive, removing the filters resolves the issue.
James Sheehan : ok
James Sheehan : I follow
James Sheehan : how do I remove the filters.
Katelynn : Sure, I will help you with the steps in this regard.
Katelynn : Please perform the below given steps.
Katelynn : Open device manager.
Katelynn : 1. Tap Window key(flag key on the keyboard) and R key on the keyboard, at once. You would see the Run window on the screen.
Katelynn : 2. Type devmgmt.msc and Click Ok.
James Sheehan : open
Katelynn : Click on the '+' sign near the CD/DVD drive and let me know the devices under it.
James Sheehan : hl-dt-st dvdram gsa-t50l ata device
Katelynn : Just to confirm is there now a yellow exclamation mark on the device.
James Sheehan : yes
Katelynn : Thank you for the confirmation.
Katelynn : Now, right click on CD/DVD drive you have and click on uninstall driver.
James Sheehan : k
James Sheehan : uninstalled
Katelynn : Alright.
Katelynn : 1. Now click Start , and enter "regedit " into the Start Search field. The registry editor window appears.
Katelynn : 2. Select Computer in the main window.
James Sheehan : k
Katelynn : 3.Click File , Export , type a filename that is easy for you to remember, and click Save . A copy of the registry has saved for back-up purposes to the Documents folder. If problems occur after using these steps, browse to the file and double-click it to restore the registry.
James Sheehan : it is backing up now
James Sheehan : done
Katelynn : Alright.
Katelynn : We are done upto some extent.
Katelynn : 4. Click the plus sign ( + ) next to the following items in the list:
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
Katelynn :
5.Select CLASS option
Katelynn : 6.Select 4D36E965-E325-11CE-BFC1-08002BE10318 . Make sure you have selected this exact key name.
James Sheehan : k
Katelynn : 7.Select the LowerFilters value and press the Delete key. Confirm the deletion by clicking Yes
Katelynn : 8.If an UpperFilters value is also listed, select UpperFilters in the right window and press the Delete key. Confirm the deletion by clicking Yes .
James Sheehan : k deleted
Katelynn : Delete either of the options you see.
James Sheehan : There was only lower and I deleted it..
Katelynn : That's good.
Katelynn : I appreciate your efforts.
Katelynn : Open device manager again , Once just click on the computer option in the device manager first and then click on the Action menu on the top of the Device Manager window and select the option "Scan for hardware changes".
James Sheehan : ok drive is back in "computer"
James Sheehan : also no yellow mark in device manager
Katelynn : That's Great!
Katelynn : Perfect!!!
James Sheehan : it is reading my cd as well..
Katelynn : Thank you for the appreciation. Without your co-operation, I would have been ineffective.
James Sheehan : what causes this
Katelynn : Now, please try playing a dvd or cd in order to check whether the disc drive works and let me know if it works ?
James Sheehan : you said the install of another program? hmm
Katelynn : That's nice.
James Sheehan : I am installing quicken as we speak
Tuesday, February 17, 2009
Vista Windows Update Fails with error 80004002
Create a batch file with the following
REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 QMGR.DLL /S
REGSVR32 QMGRPRXY.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S
run it, if it doesn't fix try this
>
> I have been trying to solve this 800B0100 error for months, and last night
> solved it!
>
> For me this was the solution:
> 1. Click Start, on "Start Search", type "cmd" (without quotations mark) and
> right click the command prompt icon select Run as Administrator.
> 2. In command prompt, type the following command and Enter: regsvr32
> wintrust.dll
>
> If this doesn't work for you try the following:
> 1. Disable any Firewall, Antivirus, download accelerator software.
>
> Firewalls and Antivirus programs are 3rd Party (non-Microsoft) Programs, and
> although they are mostly effective in protecting your computer from Viruses
> and Computer hackers, they do fail to take into consideration program
> installations. The nature of these programs is that they scan everything on
> the computer, making sure to try and stop any virus-like activity.
>
>
>
> When you visit Windows Update and download, and most importantly install any
> of the updates, the update installation is always battled by the Antivirus
> and Firewall until the Antivirus clears the program of being a virus. In most
> cases, this is harmless and the Update installation goes through
> successfully. Occasionally, the Installation gets corrupted, and a process
> during the install is stopped, or interfered with by the Antivirus product.
>
>
>
> For this reason, we suggest that you disable any Antivirus or Firewall
> software while trying to install updates from Windows Update.
>
>
>
> 2. Verify the Language Settings
>
> 2.1. Start Internet Explorer.
>
> 2.2. Click "Tools", and then click "Internet Options".
>
> 2.3. Click the "General" tab, and then click "Languages".
>
> 2.4. In the "Language" list, make sure that the operating system language
> version is included. If the operating system language version is not on the
> list, click "Add", click the language in the "Language" list, click "OK",
> click "OK", and then click "OK" again.
>
>
>
> 3. Reset Internet Zone Security
>
> 3.1. Start Internet Explorer.
>
> 3.2. Click "Tools", and then click "Internet Options".
>
> 3.3. Click the "Security" tab, and then in the" Select a Web content zone to
> specify its security settings" box, click "Internet".
>
> 3.4. Click "Default Level", and then click "Apply" to set this zone to
> Medium security.
>
> 3.5. Click "OK".
>
>
>
> 4. Verify that the Date and Time Are Set Correctly
>
> 4.1 In the bottom right corner of your screen, double click the time. This
> will open the Date and Time Properties window.
>
> 4.2 Please check that all details are correct including the year, the Time
> zone and that AM/PM is set correctly.
>
> 4.3 Click OK.
>
>
>
> If the problem persists despite performing above troubleshooting steps, I'd
> like you to perform below guidelines to download and install a new Windows
> Update Agent as the current one might be corrupted.
>
>
>
> 1. Open Internet Explorer and paste on address bar
> http://go.microsoft.com/fwlink/?LinkID=91237 (for 32 bit) or
> http://go.microsoft.com/fwlink/?LinkID=91238 (for 64 bit)
>
> 2. A box will prompt to save a the Windows Update Agent file, save it on the
> Local C: drive.
>
> 3. Click Start, on "Start Search", type "cmd" (without quotation mark),
> right click the command prompt icon and Run as Administrator.
>
> 4. Type c:\WindowsUpdateAgent30-x86.exe /wuforce in the command prompt and
> Enter.
>
> 5. Follow the instructions to install the Windows Update Agent.
>
> 6. Please restart the computer after the installation.
>
> 7. After restarting the PC, click on Start and choose Windows Update and it
> will open a new Internet browser.
>
> 8. A box will prompt asking permission to install the Windows Update
> software, click Install and proceed to download the updates.
>
> If it still fails, type the following commands in command prompt, pressing
> ENTER after each line:
>
> net stop cryptsvc
> ren %systemroot%\system32\catroot2 oldcatroot2
> net start cryptsvc
REGSVR32 WUPS2.DLL /S
REGSVR32 WUPS.DLL /S
REGSVR32 WUAUENG.DLL /S
REGSVR32 WUAPI.DLL /S
REGSVR32 WUCLTUX.DLL /S
REGSVR32 WUWEBV.DLL /S
REGSVR32 QMGR.DLL /S
REGSVR32 QMGRPRXY.DLL /S
REGSVR32 JSCRIPT.DLL /S
REGSVR32 MSXML3.DLL /S
run it, if it doesn't fix try this
>
> I have been trying to solve this 800B0100 error for months, and last night
> solved it!
>
> For me this was the solution:
> 1. Click Start, on "Start Search", type "cmd" (without quotations mark) and
> right click the command prompt icon select Run as Administrator.
> 2. In command prompt, type the following command and Enter: regsvr32
> wintrust.dll
>
> If this doesn't work for you try the following:
> 1. Disable any Firewall, Antivirus, download accelerator software.
>
> Firewalls and Antivirus programs are 3rd Party (non-Microsoft) Programs, and
> although they are mostly effective in protecting your computer from Viruses
> and Computer hackers, they do fail to take into consideration program
> installations. The nature of these programs is that they scan everything on
> the computer, making sure to try and stop any virus-like activity.
>
>
>
> When you visit Windows Update and download, and most importantly install any
> of the updates, the update installation is always battled by the Antivirus
> and Firewall until the Antivirus clears the program of being a virus. In most
> cases, this is harmless and the Update installation goes through
> successfully. Occasionally, the Installation gets corrupted, and a process
> during the install is stopped, or interfered with by the Antivirus product.
>
>
>
> For this reason, we suggest that you disable any Antivirus or Firewall
> software while trying to install updates from Windows Update.
>
>
>
> 2. Verify the Language Settings
>
> 2.1. Start Internet Explorer.
>
> 2.2. Click "Tools", and then click "Internet Options".
>
> 2.3. Click the "General" tab, and then click "Languages".
>
> 2.4. In the "Language" list, make sure that the operating system language
> version is included. If the operating system language version is not on the
> list, click "Add", click the language in the "Language" list, click "OK",
> click "OK", and then click "OK" again.
>
>
>
> 3. Reset Internet Zone Security
>
> 3.1. Start Internet Explorer.
>
> 3.2. Click "Tools", and then click "Internet Options".
>
> 3.3. Click the "Security" tab, and then in the" Select a Web content zone to
> specify its security settings" box, click "Internet".
>
> 3.4. Click "Default Level", and then click "Apply" to set this zone to
> Medium security.
>
> 3.5. Click "OK".
>
>
>
> 4. Verify that the Date and Time Are Set Correctly
>
> 4.1 In the bottom right corner of your screen, double click the time. This
> will open the Date and Time Properties window.
>
> 4.2 Please check that all details are correct including the year, the Time
> zone and that AM/PM is set correctly.
>
> 4.3 Click OK.
>
>
>
> If the problem persists despite performing above troubleshooting steps, I'd
> like you to perform below guidelines to download and install a new Windows
> Update Agent as the current one might be corrupted.
>
>
>
> 1. Open Internet Explorer and paste on address bar
> http://go.microsoft.com/fwlink/?LinkID=91237 (for 32 bit) or
> http://go.microsoft.com/fwlink/?LinkID=91238 (for 64 bit)
>
> 2. A box will prompt to save a the Windows Update Agent file, save it on the
> Local C: drive.
>
> 3. Click Start, on "Start Search", type "cmd" (without quotation mark),
> right click the command prompt icon and Run as Administrator.
>
> 4. Type c:\WindowsUpdateAgent30-x86.exe /wuforce in the command prompt and
> Enter.
>
> 5. Follow the instructions to install the Windows Update Agent.
>
> 6. Please restart the computer after the installation.
>
> 7. After restarting the PC, click on Start and choose Windows Update and it
> will open a new Internet browser.
>
> 8. A box will prompt asking permission to install the Windows Update
> software, click Install and proceed to download the updates.
>
> If it still fails, type the following commands in command prompt, pressing
> ENTER after each line:
>
> net stop cryptsvc
> ren %systemroot%\system32\catroot2 oldcatroot2
> net start cryptsvc
Subscribe to:
Posts (Atom)